HOMEABOUT SEARCH CONTACT
Applications :: Materials :: Properties :: Processing :: Data Sheets :: Standard Products :: Design Guide  
Properties
       
 
go Fracture Toughness
 
go Flexural Strength
 
go Corrosion Resistance
 
go Thermal Properties
 
go Hardness
 
go Wear Behaviour
 

Properties > Flexural Strength

Flexural Strength in ceramic materials is usually measured by breaking test bars or rods in 3 or 4 point bending on a universal testing machine.

Flexural Strength

Flexural Strength in ceramic materials is usually measured by breaking test bars or rods in 3 or 4 point bending on a universal testing machine.

The picture to the left shows a bar of Technox® 2000 (300 x 12 x 4mm) being tested and which is deflecting 4.5mm at its centre. Yet another example of the ultra high strength of Technox® ceramics.

 
 
     
  | Back to top
 Crewe Hall, Weston Road, Crewe, CW1 6UA England
 Tel: +44(0)1270 501000, Fax: +44(0)1270 501423
 sales@dynacer.com

© Copyright Dynamic Ceramic 2008

DYNAMIC-CERAMIC LTD - Providing solutions to Wear and Corrosion Problems.

| Disclaimer