 |
| |
|
|
|
| |
|
Tape Casting
This process involves the casting of a slurry onto a flat moving
carrier surface. The slurry usually consists of a ceramic powder
with the appropriate additions of solvents plasticisers and binders.
 |
| Doctor Blade on Tape Cast
Strip "As-Cast" Strip |
 |
The slurry passes beneath the
knife edge as the carrier surface advances along a supporting
table. The solvents evaporate to leave a relatively dense
flexible sheet that may be stored on rolls or stripped from
the carrier in a continuous process. |
"As-Cast" Tape Cast Strip
|
|
|
|
| |
|
|
|
|
Crewe Hall, Weston Road, Crewe, CW1 6UA England
Tel: +44(0)1270 501000, Fax: +44(0)1270 501423
sales@dynacer.com
|
|
|
|
|
© Copyright Dynamic Ceramic 2008
DYNAMIC-CERAMIC LTD - Providing solutions to Wear and Corrosion Problems.
| Disclaimer |
